・Temperatures for 2 fluid channel systems can
be controlled individually by one chiller.
・Space saving, Reduced wiring
Footprint: 22% reduction
One power supply system for 2 channels
Power consumption reduced by 30%
・Power supply: 3-phase 380 to 415 VAC (50/60 Hz)
3-phase 460 to 480 VAC (60 Hz)
Other Data :
> Safety Instructions
> Temperature Control Equipment/Precautions
> Features/Series Variations
> Technical Data
> Can be used in a wide range of applications!
> Temperature Control Equipment Warranty
> Green Procurement (RoHS)
Keeping the size similar to the (HRSH series) single chiller, the temperature of 2 fluid channel systems are controlled individually.
The inverter respectively controls the number of motor rotations of the compressor, fan and pump depending on the load from the user’s equipment.
●Circulating fluid can be heated without a heater. (Circulates the hot discharged gas through expansion valve B)
■Temperature stability: ±0.1°C (CH1) When a load is stable
By controlling the inverter compressor, inverter fan, and electronic expansion valve simultaneously, it maintains the good temperature stability when the heat load fluctuates.
■3 operation modes of the circulating fluid pump
The pump operation mode can be selected by the touch panel.
■Reduced maintenance hours for the pump
Both channels use the mechanical sealless type pump. As the pump has no external leakage of the circulating fluid, a periodic check of the pump leakage and replacement of the mechanical seal are not necessary.